anaren, inc. / 6635 kirkville road / east syracuse, ny 13057 800.411.6596 / http://www.anaren.com / air@anaren.com preliminary ? frequency range: 865-868 mhz ? etsi compliant, shielded package ? digital rssi output ? programmable output power up to +10dbm ? high sensitivity (-112 dbm at 1.2 kbaud, 868 mhz 1% packet error rate) ? ultra-small package size 9 x 16 x 2.5mm ? lga footprint ? rohs compliant ? operating temperature -40 to +85c ? impedance-controlled, multi-layer pcb ? 1.8 to 3.6 vdc ? low current consumption (15 ma in rx, 1.2 kbaud, 868 mhz ) ? 200 na sleep mode current consumption ? efficient spi interface; all registers can be programmed with one ?burst? transfer ? available in tape & reel and matrix tray A1101R08A the A1101R08A is a high-performance, etsi compliant radio module that incorporates the texas instruments cc1101 transceiver chip in the indus- try?s smallest package (9 x 16 x 2.5mm). 1101 series features benefits block diagram this product shall not be used in any of the following products or systems without prior express written permi ssion from anaren microwave, inc: (i) implantable cardiac rhythm management systems, including without limitation pacemakers, defibrillators and cardiac resynchronization devices; (ii) external cardiac rhythm management systems that communicate directly with one or more im plantable medical devices; or (iii) other devices used to monitor or treat cardiac function, including without limitation pressure sensors, biochem ical sensors and neurostimulators. ? no rf engineering experience necessary ? no additional ?intentional radiator? certifica- tion required (etsi en 300 220) ? minimal real estate required ? easily implemented on a two layer pcb ? no additional harmonic filtering required ? 100% rf-tested in production ? common footprint for product family ? no additional dc decoupling required ? integrated analog temperature sensor ? excellent receiver selectivity and blocking performance ? suitable for frequency hopping systems, thanks to a fast-settling frequency synthesizer with 90 s settling time ? impedance-matched balun for optimized effi- ciency ? support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communica- tion protocols please note: additional information on the texas instruments cc1101 device can be found in the company?s latest datasheet release at http://www.ti.com
anaren, inc. / 6635 kirkville road / east syracuse, ny 13057 800.411.6596 / http://www.anaren.com / air@anaren.com preliminary product overview nomenclature caution! esd sensitive device. precautions should be used when handling the device in order to prevent permanent damage. the A1101R08A is a high-performance, etsi compliant radio module that incorporates the texas instruments cc1101 transceiver chip in the industry?s smallest package (9 x 16 x 2.5mm) and is compatible with all ti-approved software stacks. with an lga pad footprint, this module is de- signed to effortlessly integrate into a wide range of applications, including: industrial control, build- ing automation, low-power wireless sensor net- works, lighting control, and automated meter reading. the A1101R08A has an rohs-compliant enig finish and is packaged on tape and reel for high- volume automated manufacturing. footprint pin diagram a (anaren) 1 chip series (1101, 2500) 2 function (r = radio only) 3 frequency band (x100mhz) 4 form factor (a = internal antenna, c = connector) 5 design id (00 = default) 6 application (g = general) 7 packaging (r = tape/reel, m = matrix tray) 1104a refer to user?s manual for additional layout guidelines. dimensions in mm. dnc = do not connect
|
